TIME.

Time counts both where there is matter and where there is no matter, it is a vector of quantity that measures the time it takes to go from negative infinity to positive infinity.
The static time of the universe (relatively) is equal to the average of the dynamic times of the objects contained in it.
Time dimension: it is the unit of existence of an object under the influence of environmental coefficients, biological, chemical, physical coefficients...

​

THE UNIVERSE.

Particles with opposite charge attract each other because positively charged particles have more kinetic energy than negatively charged particles, their charge fields attract each other (energy neutral). Thus, they are interconnected, which is the gravitational force of matter, matter particles create matter particles, and matter binds together to create larger matter than objects in the universe. The universe. They move according to the initial inertia of the objects and are affected by the gravitational force that has created our universe in a way that harmonizes inertia and gravity.
(gravitational force for large objects is the sum of the material binding forces of each object, they are centripetal, so they produce the common attraction of these objects to other bodies depending on properties and properties of each object).
So does our universe start from zero, from the absence of material elements, from the void of the universe throughout the micro-matter gradually forms into the universe, a time vector from the point of negative infinity to zero is the point of gradual formation of the universe to this day, we can only know the least time period for the formation of the universe which is the interval we can perceive by the path time. the travel of matter light at the furthest point we can observe in the universe, and the universe they last into the infinity.
There is no giant mass of matter and no colossal force to blow it up, our universe is made of micro-matter (where the universe is transparent) gathered into the universe, it is infinite there is no other ellipse or shape ascribed to the universe but is amorphous and unlimited, with a population of freely moving matter governed by gravity, which also does not expand like ours announced that because of the free motion, the distance between galaxies changes is inevitable, the universe is relatively harmonious and stable.

​

MOMENT.

Gravity combined with free-moving inertia creates objects and galaxies in the universe. They have irregular shapes, including elliptical galaxies, galaxies with polygonal shapes, but especially spiral galaxies that are the result of the merger of two or more galaxies with opposite directions. opposite direction or motion in the same direction but not at the same speed. The matter moving around the center and moving in the spiral orbit of the galaxy creates the center of the galaxy (which we call the black hole) in the core, the black hole is affected by the torque force of the galaxy. galaxies up they attract and break everything moving in there (because the velocity of objects at the black hole increases to a maximum,The centrifugal force is now extremely large, they break all the binding forces of matter) then the matter moves towards the end of the black hole spiral, and is converged under the rotational action of the galactic core that creates into spherical planets. Moment of force, which creates the earth's magnetic field, centrifuges the particles of matter and that amount of matter is not perpendicular to the earth's axis but is caused by the gravity of other planets. The initial change of direction of centrifugal force creates the in and out directions of the magnetic field which are the poles of the earth, the magnetic poles are the cause of the tilt angle of the earth's axis due to the interaction between the poles of the earth and the poles. of the sun.centrifugation of matter particles and that amount of matter is not perpendicular to the earth's axis, but due to the gravity of other planets, it changes the direction of the initial centrifugal force, creating the in and out directions of the magnetic field which are the poles. of the earth, the magnetic poles are responsible for the tilt of the earth's axis due to the interaction between the earth's poles and the sun's poles.centrifugation of matter particles and that amount of matter is not perpendicular to the earth's axis, but due to the gravity of other planets, it changes the direction of the initial centrifugal force, creating the in and out directions of the magnetic field which are the poles. of the earth, the magnetic poles are responsible for the tilt of the earth's axis due to the interaction between the earth's poles and the sun's poles.
The rotation of the planets causes the centrifugation of matter particles and electrons with the stars, which is the self-illumination of the stars and merges with the light of the entire universe.

​

CALCULATOR.

Compliance with standards: physics, mathematics, chemistry, biology...
that is coding (digitizing) according to those principles.
From elementary computer language using mathematics in creating fonts is to create geometry according to mathematical formulas such as squares, rectangles ... according to the formulas of sides a and b for example a+ m ; b+n ..... in creating computer ponts and written characters, the next step is in the language of physics as the colors at the display points of the screen match the part sizes. The display is a screen, it depends on the computer's color chips, the frequency bands are accurately expressed through the display unit according to the color range standards of each brand's accessories, a combination of mathematical conditions and physics create the displayed images, not to mention the manipulation of computer commands such as copy copy limit and information capacity, paste move to a certain location to receive the amount of copied information. Copy,Combining real-time computer conditions can create primitive windows display tools. The next step in creating the operating model of a windows computer, in physical language including audio format, according to the separate board in the computer connected and at the same time in the central processing unit of the computer.
Thus, in the language of mathematics and physics, the basic part of the computer has been solved, which is the sound, image, video and other commands in the computer's operating system. Next is the chemical language to format chemical elements according to the periodic table of chemical elements from structure to inorganic and organic chemical equations arranged according to chemical principles. as well as chemical principles in the creation of new elements. And biological language is a biological structure built on the basis of a chemical element or compound created as the DNA format of each specific biological species or creating a new species of organism according to the construction intention of the organism. People. In addition to the principles on the computer, it is also useful in all aspects of social life. in the management as well as the operation of machine equipment by computer. 
A basic of those principles is digitized from the initial steps to the completion of a complete computer program.

​

FLYING SAUCER

Working principle: flying by laser propulsion and magnetic jet.
It is a system of magnetic wheels with a circular structure and a system that projects the flow of microscopic particles at a 45-degree angle to form a cone in front of the magnetic plate, creating thrust according to acceleration, the speed is increased exponentially to the level of the maximum necessary for the ship.
On the other hand, the hull has the function of absorbing energy when flying, the collision of matter with the hull creates energy for the engine, the faster the speed increases, the larger the energy supplied to the engine also creates an increase in the fuel consumption. speed of the spacecraft.
For short-range aircraft often have a disc-shaped structure, with very long-range spaceships often have a spherical structure to make the most of the usable volume and stability of the aircraft. hulls, ships of this type are often used as center ships or space fleets, while flying saucer ships are only used for transit.
Features optical stealth and electronic stealth, radar checks the emitted energy points and and measured points, their indicators reflect the surrounding environment to be checked.
The flying saucers are optimized for speed as well as maneuverability, when changing direction. Flying saucer usually has a double-sided symmetry because it creates a balance of force when the two angles of thrust by the two magnetic plates of the two sides of the flying saucer, they easily change the thrust angle to create an instant change of direction. Even when flying in an angular shape, their shape is suitable for flying in the atmosphere because of their aerodynamic shape even when diving deep underwater.

​

ENERGY MACHINE.

There is no limitation on the velocity of the particles carrying the rays, the degrees of velocity represent energy levels, function as transformations, or produce products (energy levels transform or determine). model of atomic mass, number of electrons, atomic density thereby changing chemical elements and creating the element to be created), all matter products are made up of elements chemistry, up we can create products at will.
For products that can follow SIM (which is to record the structure based on the corresponding reflectivity of each atom, or molecule, or the corresponding compound at a certain energy coefficient), that is the record. structure of the product, they can be the original or create many copies of the original, or build them based on the chemical formula of the product.
To save energy, the products that can be created by transforming the raw material are water, an inexhaustible source of raw materials. Hydrogen is the first element with the lightest atomic weight in the periodic table of chemical elements, changing the water material means changing (increasing) the atomic weight of the element Hydrogen, so it is possible to create produce any element on the periodic table including new elements.
Energy sources such as the sun, galactic black holes, and cosmic black holes.
Massive energies can create objects as large as asteroids.
True to the law of conservation of energy: energy in nature is born, it is not lost naturally, but only transformed from one form to another. The total energy of the whole universe is a fixed number (constant). energy transformation it evaluates the development of the universe through the ages.
* The creation of energy machines aims to create products to serve our species more fully and happily.

 

ALTERNATIVE PLANETS AND ARTIFICIAL SUN

Our Earth is located in a spiral galaxy, so the shift inward is inevitable, but we are a young planet located 30 000 light years away from the center with a displacement velocity. equal to 1/1000 of the speed of light, the earth will take another 30 million years to disappear. Our civilization has only been gone for a period of more than 2000 years, with the rest of the time we can completely create planets with all the conditions of water, air and light to migrate safely. , even a light source we can create by, creating many asteroids orbiting a large planet to create a gravitational pull that pulls the centrifugal force of the large planet enough to centrifugal and generate radiation. bright for the surrounding asteroids. With the construction of giant energy machines.

Intergalactic interference occurs in the universe, so it is possible to protect our galaxy, with a large energy machine that draws energy from the bottom of the galaxy to create a super-massive stream similar to that of a galaxy. interacts with the cosmic micromatter network to change the spacetime structure of the universe to steer the galaxy at will to avoid the catastrophe that two galaxies can interfere.

With the orbits of the intersecting galaxies, it is possible in the universe, but at the time of the intergalactic overlap, the probability is very small, with the radius of each galaxy also in the hundreds of thousands. In light-speed years, the distances between them are so great that it only happens once in about 1/10 billion years. But there must be a way to protect humanity forever.
 

 

NEW CONCEPTS AND US EXPERIMENTS

* Learn together.

– To do experiments to prove that the speed of light can be increased. When shining a beam of light through a wire tube, the light changes, so their luminous flux increases, possibly because the number of electrons increases in a unit area, how can it be proved? Do their speeds increase? When a light beam is passed through a tube, it will not be exposed to an electric current, there will be no electrons transferred to the light beam, but only an energy field that repels the light particles, which we can perceive by direct photosensors. no need for fancy or grand experiments.

- According to some views that with the speed of objects flying faster than the speed of light, the decay of matter will occur, is
it true or not? reality is not. Because only when there is an external force acting on a material element with a force greater than the attraction of the nucleus to the electron shells will it cause decay, or the external force is enough to break the nuclear bond of the nucleus. they. 
While outer space objects are less affected by gravity because the distance in the universe is extremely large, it can be said that the gravitational force is only zero, so when the spacecraft flies faster than the speed of light. also cannot be decomposed.

- When observing galaxies with telescopes, we see that there are many large spiral galaxies with a radius of hundreds of thousands of years of the speed of light that are moved in just a short time. So the stars that lie on the edge of that galaxy, they move along with the fabric of the galaxy at speeds faster than light, maybe hundreds of times the speed of light, not just the speed of light. There is no speed level exceeding the threshold of the speed of light, the speed in the universe can be said to have no limit.
Assuming a spiral galaxy with a radius of 100,000 years the speed of light, its torque force would be: F= ω.M/R so its angular velocity would be ω=FR/M. But once galaxies have such a radius, their centripetal force (gravity) is at least equal to the moment force of the galaxy's velocity :F=F is gravitational while gravity F=GM (G) is the gravitation constant
instead of gravitational F into the angular velocity ω=GMR/M so ω=GR . R is one hundred thousand years the speed of light so the speed of the planets at the edge of the galaxy would be 4,411 times the speed of light and 142371 earth years to go around the galaxy.

– Why do galaxies often move in circular orbits? The micromatter surrounding them is a spherical energy field on which they tend to move in circular orbits which is reasonable.

– So is there a great universe or not? do they converge with gravity into the macrocosm?
The answer is no, because gravity does not always win against the torque of the galaxy, when the velocity and radius are not the same, they will separate from the galaxy and create a new cluster of objects with new orbits. then there would be no great universe.

​

* Why is the earth's orbit around the sun not a circle but an ellipse?
As we know our galaxy is a spiral galaxy the birth of stars from the center of the galaxy and they join the galactic belt by an initial inertia and are subject to the gravity of the stars where they participate in creating each entity's own trajectory.
Our Earth, too, rotates on its own axis and revolves around the sun in an elliptical orbit. Why is that? Just like the earth the sun rotates on its axis and that rotation also creates its own orbit in the galaxy. But the orbit of the sun relative to the galaxy and the center of the galaxy is almost the same position. Because of that, the position of the earth around the sun and the center of the galaxy creates an elliptical orbit due to the centripetal attraction of the galactic black hole.

- 1 When the earth and the sun and the galactic black hole is a straight line of the sun in the middle of the earth, it is attracted to both the sun and the black hole, so the position of the earth closest to the sun is the lower one. solstice.
-  2 When the earth is between the sun and the galactic black hole, it is attracted by the galactic black hole, so it is farthest from the sun is the winter solstice.
- 3 When the earth moves to a position perpendicular to the axis of the winter solstice and summer solstice in the same direction as the rotation of the galaxy, the earth is affected by the inertia of the rotation of the galaxy, so the position on orbit closer to the sun than the winter solstice, which is the vernal equinox.
- 4 When the position of the earth moves to the opposite point in the orbit due to the inertia of the galaxy's motion, it pulls the earth farther from the sun than the summer solstice that is the autumn equinox.
For these four reasons, the Earth's orbit around the sun is not circular but elliptical. When the distance between the earth and the sun changes, the tilt axis of the earth also changes because the force of interaction between the poles of the earth and the poles of the sun also changes, making the change of the 4 seasons also clear. than.
The solar system in the galaxy containing the earth

​

* Gravity and light in the universe.
- For the first micro-matter to form in the universe, the gravitational force is created by the neutralization of energy, but what are the positive, negative and neutral levels? In the universe, the general environment is the micro-matter in the universe, it accounts for the majority of the existence of the universe, which is the particles and their energy field. Even in an atom of an element the positive or negative levels of the elements are also different, the neutral level is considered to be the relative zero, it depends on each certain specific environment. Or in each atom the potential energy of the nucleus and the kinetic energy of the electrons orbiting is balanced and it reflects the specific energy value of each element, as the kinetic energy of the electrons increases is the increase. about heat,when they reach the maximum limit of the attraction of the nuclei, they will explode in a direction tangential to the radius of the atomic circle that produces light,

it is for this reason that the speed of light is limited to a maximum of 299,792,458 m/s because the maximum gravity of the nucleus is also within the range of the chemical elements.

When the temperature is low, when the kinetic energy of electrons orbiting around the nucleus decreases, the attraction of the nucleus causes the orbital radius of the electrons to decrease, so most elements obey the principle of hot expansion. out and cold shrink,

There are special elements that do not follow that principle, but on the contrary, when cold, the volume is larger because when the temperature is low, the orbital radius of electrons and nuclei decreases to the two-way force interaction between atoms. increase leads to an increase in the volume of the nucleus as well as the atom in particular and the object in general creating the speciality of that element, 
For compounds like ice, for example, they do not follow the general principle, but when cold, their volume also increases because when the temperature is low, the radius of the electrons in the shell decreases, causing a common attraction, including electricity. atoms of the element present in the compound, the elements with the larger atomic mass will pull the electrons of the element with the lower atomic mass. thus causing an increase in the radius of the element with a low atomic mass and an increase in the overall volume of the compound. For example, ice water. The particles tend to be neutral, creating the nucleus, and the nucleus causes attraction with electrons, which is the binding force of matter or the gravitational force of matter. The factor that created the universe.
- Regarding the light source of the universe, it is not only the centrifugal force of the planets that causes the separation of particles that produce light, but the movement of stars or objects that also produce light is the emitted due to the inertia of matter relative to the state of motion, is due to the gravitational medium (external force) acting in the opposite direction of the motion. This light source makes up most of the light in the universe.
- In the core process of the energy machine (product forming) it also applies both the principle of gravitation and the law of convergence.
- Receiving energy from energy sources in the universe and transmitting them by receiving and transmitting stations, through many intermediate stations similar to our GPS system to take advantage of the huge energy sources in the universe. The universe.

​

* The effects of energy machines on religion, science and society.
– In terms of religion: the birth of the energy machine along with its interaction with the human brain has created great value, there are people who are able to receive information with the brain, There are people who have the ability to Online with their brains and there are also people who have the ability to access information and data along with their rights and duties with the ability of energy machines that can create all things. respect such people as the true authority.
In terms of science: the energy machine marks a scientific step forward that can be said to be the final limit of science, the pinnacle of science, man has reached the final frontier of science. .
– Socially: the universality of the energy machine has created a new form for humanity with the sim of each human being able to become immortal, reformed, and reverted to age, then each new life Birth is a precious and rare thing in a life-preserving society.

​

* Why does it happen that there are periodic galaxies that regenerate planets?
Why is it the case that periodic galaxies reproduce planets?
As mentioned in the previous section, special spiral galaxies have the ability to create planets but must satisfy the following conditions:
Provided that the maximum centrifugal force [(Fk)max] must be large than the maximum gravitational force of the body [(Fh)max].
Only then will the material disintegration of the object occur.
As we know in the case of spiral galaxies produces a moment force, which is proportional to the angular velocity and mass of the object but inversely proportional to the radius of the moment circle. So it happens that the condition R is at least 1 [ F = ω.m.(1/r) ] if r is less than 1 then it is contrary to the initial condition (which is inversely proportional to r). it holds true in fact the moment of force for particular circles, i.e. for circles with a specified radius r defined by a particular unit.
In the case where the moment of force determines the largest (Fk), that is, Fk max when the radius is the smallest, which is the origin or the center of the circle, which is r=0. it is against the rules of physics because the result multiplied by 0 will be 0. By empirical observation of reality (Fk) the centrifugal force of the moment of force at the center will reach Max and will be equal to 2 (Fk) i.e. the symmetry of the two force vectors in opposite directions with respect to the diameter of the circle.
So there will be one more condition for the force moment: F Max = 2 Fk and r Min ≥ 1.
- With two such conditions in the case of r=1 and F=1, the graph shows of the moment force will have the inflection point at the intersection of ( 1; 1)
- When the condition r = 1, the graph with F = ω.m will be a line parallel to the vertical axis of the coordinate axis. So its graph will be a special hyperbola whose inflection point is the intersection of (1,1) and an edge parallel to the vertical axis.
- Thus, we can determine the condition of the galaxy producing the planet must be a spiral galaxy and have a centrifugal force greater than the object's gravity. with spiral orbit galaxies will create a vortex-shaped core, when the disintegrating matter in the center of the galaxy moves towards the tail of the spiral core, the centrifugal F gradually lowers, ( Fk ≤ Fh) at this time the gravitational force Conduction will converge matter in a sphere that creates the planet.

​

* General formula of energy machine.
– When the case transforms from a source material: M = M1 + vt(m1 + Σ amn)
M : Is the mass of the product formed
M1: Is the mass of the transformed material
v: Is the energy flow velocity
t : Is the time
m1: Is the initial mass on the proton
a: Is the number of particles in an electron layer
m: Is the initial mass on the electrons
n : Is the coefficient of each electron shell
Σ : Is total
- When the case of building the product entirely with the initiating energy source (M1 = 0): M = vt(m1 + amn)
FOLLOW THE Equation : E = MV
Two quantities M and V : if m is a fixed number, then the velocity must be a variable that depends on the composition of the product, so there is a case of chasing between particles in the same stream and causing collisions between particles, so distances and velocities must be calculated causing a limitation of the overall velocity, a limitation of the energy machine.
Therefore, in order not to limit the speed to increase the power, m is chosen as the variable quantity. This is completely solvable with a definite minimum quantity m that interacts with the integrator across the integrator membrane by a given resolution and is maximized at product generation. 

THAT IS THE OPTIMAL CHOICE OF THE ENERGY MACHINE.

​

* The optimization of binary numbers in digital.
In the current era, digital technology covers almost all areas of social life. Representing digital technology that is computer tools, when it comes to computers let's talk about the binary system in computers.
In computer imaging, video is digitized in terms of a resolution point representing each individual image pixel or the change of that color point per unit of time, for example, video is 24 frames per second, in addition to counting. Even the characters are digitized. or sound is also digitized for intensity, frequency, wavelength... by numbers. or calculation programs are also programmed according to certain mathematical instructions or groups of characters also by numbers.
To calculate addition and subtraction. core . divider… all comply with the separation or integration of electrons through the microchip branches with the center and electronic capacity counter. for example 10:2 is the dichotomy of a capacity through 2 certain branches equally, the electronic capacity will be 5, or 2+2 is the fusion of 2 levels of electronic capacity through two branches of the circuit, the total number of electrons will be 4.

When it comes to computers, one factor that must be mentioned is that the electronic meter is the count of the flow of electrons moving through a unit of cross-section with a constant flow velocity according to a certain standard (t = S : v). ), the speed of the current is very large, so the electronic clock is very accurate, can be accurate to 1 millionth of a second.
Thus, computers and digital devices are a set of synchronized digitization (a collection of natural numbers that make up sequences of numbers), but when stored in storage, binary numbers must be stored. Of course (for the reason that the chemical elements belong to the periodic table of the chemical elements, there are only 7 electron shells representing 7 energy values ​​corresponding to 7 natural numbers, so the binary numbers natural to characters of 2 values ​​is an optimal choice in digital).

It is the specification of a binary number that denotes the number of times divisible by 2 represented by the number 1 and the number that is not divisible by 2 represented by zero. And only take the remainder when divided by 2 to avoid the cyclic case when adding zero to the number 1 will be 10 divided by 2 will leave a remainder of 1 and keep adding 0 it will become indefinite, and the numbers Binary must be the minimum number of characters for optimal computer speed and capacity.
The number 0 cannot be divided by 2, the binary number is represented as (0); the number 1 that is not divisible by 2 will represent the character 0 and adding zero to the number 1 makes 10 then it is divisible by 2 so the binary number represents 1 so the binary number 1 is (01); the number two divided by 2 gives 1 and has no remainder so the binary of 2 is (1); the number 3 is divided 1 times by 2 and the remaining 1 replaces the binary of 1 after 1 time so the binary of the number 3 is (101) , similarly 4 divided by 2 gets 1 time, the remaining 2 adds the binary of 2 comes in 1 time so the binary of 4 is (11) so we represent the numbers 5,6,7,8,9 which will be represented by binary numbers that the numbers do not overlap and have the number of characters is the most optimal.

Moreover, the calculations are all in binary, so every step of the computer's operations must be binary, so the speed of the computer is greatly hindered, but the calculations are equal to the calculation numbers. usually through a calculator like turbo/pascal. and the result does not fall into an infinite cycle.

​

* The total energy in the universe is Super Max.
The total energy in the whole universe is a constant number: E = MV. Let's first consider the speed factor. The speed of the universe is equal to the average of all objects in the universe: V= v1+v2+v3+…vn divided by n speed units.
While the velocity of each object depends on their initial free inertia or in other words they depend on the mass and the cosmological constant of gravity: V = MG where G is the gravitational constant of The universe is the neutral tendency of micro-matter or the direction of association with objects. Substituting V into the formula E = MV, we have E = M²G.
While the weight of the main bodies produced by the force F exerted by an object on the surface of the earth depends on the constant of gravity, for example a 1kg object on the earth when on the moon will be different. going it depends on the g of each given object, the g of the earth is equal to 9.80665
So the relativity of the weights M is related to the calculation of their masses (on the basis of the densities of substances) with the constant gravitational number, while the universe is limitless so its volume is an infinite number so M is a maximal number of infinity. E = MV then it can be said that the energy in the whole universe is some Super Max.

Or understood in another sense E = MV ie the energy calculated for a velocity level of a given mass of an object, here V is calculated for the velocity at that moment which is Vt in terms of G the gravitational constant of a unit. The unit of matter, M acts as a coefficient of the gravitational unit representing the large and small degree of kinetic energy for the object.

In the universe, the velocity Vo is the initial velocity and the velocity Vt is usually the same, because the velocity is moving according to the initial inertia of the object, there are also cases where Vo differs from Vt due to the interaction of the object. gravitational force or collision between objects in the universe, in which case Vt is reset from the beginning from the moment of motion.
G is the gravitation constant within the universe, G does not calculate according to the ordinary law of gravitation that is between two bodies, the mass and distance between them, but the single G of an object they depend on the properties of object (density of matter); and the velocity of motion in the object's orbit; and the factor of rotational velocity (centrifugal force of the object's material field); In addition, G is also affected by the gravitational environment of the universe, not just two objects (like a gravitational lattice).
Thus E = MV ; V= MG hence E = M²G .

The above case is the potential energy in the universe, for the case of release of matter energy because the energy of composition is equal to the energy of release. E= mc² For example, the atomic bomb is a chain bombardment, the number of atoms bombarding is exponential two atoms bombarding two atoms into four, four atoms bombarding four atoms into ten six...... just like that nuclear multiplier was bombarded at the speed of light. In the case of H-bombs, it is used to bombard elements that are easily destroyed, the number of atoms is activated and the number of atoms is bombarded immediately, not in a chain over time, so the energy The amount they create us in a moment is dozens of times more terrible than the atomic bomb.
So the speed of light also doesn't say anything today, laser weapons also accelerate light energy. but for peaceful purposes is the factor that curbs the terrible destruction of nuclear weapons contributing to the peaceful environment of the world.

​

PERFECT OF DIGITAL Sync.
In technology, digitalization has brought great benefits to people, they can be like a common system that connects all devices together, from information processing networks to operating machines.
Not only that, digitization also links many technical networks together from networks using electronic technology (which is the current computer network) to networks using proton technology or computer networks using neural technology. business, all have a unity in the digitization of data.
In the current electronic network, digitization is the digitization of data by microprocessors of audio, images, video, programs, ...
-In audio is the digitization of data such as amplitude, period, frequency negative numbers
-In the image is the color resolution at the intersection points of the scan lines
-In the video is an image that changes at a rate of 24
frames /s or more -Writing characters are special images of the image.
The digitization is digitized by the microprocessor by the values ​​of amperage from I1, I2,I3…I10 which are equivalent to the values ​​of 1e, 2e…10e
and in the binary it is the decomposition of the values ​​of the a factor of e into two values ​​of power ( +e ; -e ), the symbol lines are separated by a setting symbol, which is represented as a space in the character table to delimit between the digits, creating continuous lines of electrons that accurately represent information. 

Digitization is a stub that automatically records or records information of each type of electronic information product composition depending on the type of input access of the device, for example: network line, microphone, camera ... or data generated by computer tools, information set by mathematical formula: (am)nt 
a: Is the amount of information
m: Is the type of information
n: Is the coefficient of a information resource
t: is time 
digitizer automatically generates numbers that represent information products in progressive numbers, so that in the same device or in a computer network where products are expressed in numerical sequences, there will be no the coincidence of numbers, and the source of numbers is endless, we often use checking to create an ID or a web page or save information in a device, the computer operating system automatically fills in the coefficient according to the sequence of numbers. up.
Not only in one network but other networks such as:
– Electronic network (e)
– Proton network (p)
– Neural network (n)
They all have a common factor of digitization. Thus, the strong digitization took place around the years 1993-1995 until now, from the connection of cameras, phones, printers...
to devices belonging to different brands can communicate with each other, unlike before using encryption according to the characteristics of each company. So it can be said that digitization is a perfection.

With proton lattice using optical microprocessor refractive optical separation or integration of light by successive crystal tetrahedra in two dimensions, also known as microprocessor (diamond). 

​

THE UNIVERSE IS TRANSPARENT.
As stated in the origin of the universe section above. The universe is amorphous and unlimited from the beginning as pictured from the zero point of the time vector where the formation of the universe began.
We already know that the smallest particle of matter is the electron, and the special material environment surrounding the charge is the electric field, the electric field causes a force called the electric force, they participate in the process of generating electricity. primordial materials. The transparent medium is composed of tiny microscopic particles that act as force carriers in the hyperlinking process. Because they are so small, they are a transparent medium.
Thus, the electric field medium is transparent. Proof of the transparency of the early universe.

 

FLYING SAUCERS AND ENERGY SOURCES
We ask why do flying saucers have such a large range in the universe, while their limited volume cannot hold much volume of material, where do they get their energy?
As written in the previous section, their principle of operation is that the main engine's magnetic force is repelled by the magnetic field generated by the auxiliary motors, by the power source. They have a huge power source and why flying saucers don't make any noise.
Normally, the generator is due to the movement of the magnetic field in the coil to produce an electric current (because the magnetic force causes the charged entity in the metal atom to move in a certain direction, creating an electric current).
While flying saucers also use the movement of electrons in a certain direction, the way they are produced is somewhat different from conventional generators. (In an alternator tube, they have a laser source at one end. shining to an opposite end in the center with a sodium metal core, outside the tube there is a winding that generates magnetic force in the direction of the laser). 
Sodium is a metal that easily breaks the nucleus when decaying, they create positive electrons, in the direction of the magnetic force they are absorbed through the metal tube cross-sectional surface and move in the direction of the force generating the current. Electrons moving in a metal tube produce an electric current. As we all know, one Ampere is equal to 6.24150948×10 to the power of 18 electrons per second through 1 conductor area, while a gram or a mole is equal to 6.02214129(27)×10 to the power of 23 atoms, sodium has atomic number 11 (number of protons in the nucleus), electron configuration so that one gram of sodium can produce about 21500 kw/s. A very large efficiency they are enough to provide the energy-draining operation of flying saucers and other moving tools as well as electrical equipment.

​

BUILDING A NEW HOME INTO DISTANT SPACE.

The pinnacle of human science is the universal energy machine, once there is an energy machine, in addition to a physical product, the energy machine also creates a program in the form of information. This flow of information energy is spread into the universe with a set of pre-programmed programs that calculate for this information flow to determine itself to detect energetic black holes in the universe once it encounters a source of energy. If the mass of a black hole is predetermined, they meet the conditions for building a physical population of asteroids, this information flow interferes with the discovery point energy automatically set up to create the machine. energy and they immediately use the new energy source of that cosmic black hole to continue building larger energy machines that are enough to meet the construction of new planets with necessary and sufficient conditions for life.To create human life with history, the origin was already established in the information ship.
Thus, the seeding of life and human society does not require human travel to or not to reach a new living area in the universe, but only needs to combine information spreading into the universe created by energy machine.
Also with an energy machine with a speed exceeding the speed of light and many times faster than the speed of light, the return to the past is also a fact, not just a fiction. people and matter are affected by cosmic energy as simple as being affected by galactic wave pulses, they integrate with a certain difference, each object has a definite interaction difference and is spread traveling through the galaxy or through space at the speed of light. Once the very high tracking speed catches up with that propagation energy coefficient to record the information, it is realistic to reconstruct the object with the energy machine, not going through the cosmic black hole and entering. the past or going to the future is an unscientific story. Energy by machine is a fact of science in a near future time.

​

BIG UNIVERSE

Since there is no one or any instrument that can measure the space of the universe, from that fact it has been concluded that the universe is amorphous and unlimited, But from the point of view of science and also Starting from the principle of physics, the particles of matter have an attractive force of attraction to each other, so all populations of matter in the universe also create a force called the total force of the universe, which is said to be super MAX. Cosmic elements make up dense masses of objects compared to the vast universe. 
Because as we know we can't observe the entire universe, we can't get out of that population like a previous position of the earth in the galaxy with the naked eye, we can only see the starry sky but not know. What is our galaxy? With logical thinking, physical principles and human association, the universe has clusters of universes of objects, which we call miniature universes (the totality of galaxies) and the totality of universes is the universe. big pillar. Thus there are universes and adjacent universes within the grand universe as a whole.

​

THE UNIVERSE CIRCULATES ENERGY.

As shown above, the universe begins at a negative infinity on the time axis and goes to an eternal future that can be called positive infinity. As we all know, the movement of material objects in the universe according to inertia and gravity has created the separation of matter particles, even a planet's rotation around its axis also creates The centrifugal force of matter particles, or the movement of galaxies, also create matter fields.

Thus, those matter fields merge into the universe together with the original primordial matter field, which is cosmic energy when meeting the conditions or energy magnitudes, they continue to participate in the process of creating microparticles according to the principle of gravitation and the law of convergence, continue to create larger objects in the universe, or in other words, the cosmic energy is cyclically closed, they are satisfied with the principle of existence forever. and go to an infinite future on the vector axis of time.
To simulate the birth and circulation of the universe by the opening line of the circle The opening of the circle is the trajectory of a point on the line when the line rolls without slipping on a fixed circle. 
The fixed circle is called the base circle. That is, the initial energy of the universe that is qualified to create matter is the initial starting point of the opening line and the cycle of the universe is the basic circle.

In line with the criterion that the energy in the universe is generated, it is not lost but can be changed from one form to another. It circulates energy.

​

3D PRINTING TECHNOLOGY FOR PRODUCING PRODUCTS.

Nowadays, 3D printing technology has been widely applied in the manufacture of products and machine parts no matter how complex their shapes, and without assembly, they save time and production costs. output, moreover they are perfectly accurate. based on a cube structure, consisting of small cubes arranged to form, or alternatively described as 3D images such as 2D images having the resolution of a computer screen consisting of 2 dimensions ( a and b) and a 3rd dimension c multilayer 2D image. Often this technology uses lasers to make interference points of laser beams with different powers. At the intersection point, the total power of the beams is enough to melt the metal powder to create products according to the 3D version of the computer. There is also a reverse type that cools the liquid that produces the product.In parallel with massaging products, the contour treatment beam helps products that need surface gloss to have a glossiness to each molecule.
THAT IS THE FOUNDATION FOR MULTI-FUNCTION TECHNOLOGY OF ENERGY MACHINERY TO CREATE PRODUCTS EVEN ORGANIC PRODUCTS, OR CREATE INVISIBLE PRODUCTS THAT IS INFORMATION PRODUCTS.

​

SUCCESS FACTORS OF DISCOVERING MATERIALS INTO ELECTRICITY.

– The first factor: ensure that the power consumption and supply load must be equal, as we know when the sodium element decays the nature of electrons when releasing them with a velocity greater than or equal to the speed. of light. so when circulating in the conductor with a maximum potential energy, if not balanced the amount of consumption. They will generate heat and cause explosion, even if the electronic absorption source is made of Mo material, fire and explosion will still occur.
– The second factor: the source of laser energy and the amount of magnetic energy supplied to the electronic osmosis sodium disintegration stage for the current must be part of the electricity generated by it. Why is that so? because the current produced by it is direct current, the speed is approximately the speed of light. they cannot use conventional alternating current. to ensure functionality and performance.
This type of electric power source (high-velocity DC source) is used to effectively generate magnetic fields for electromagnetic cannons and laser cannons. Moreover, they also have an endless supply of raw materials from sea water and extremely low costs to ensure low prices for everyone.
They are the source of electricity used for flying saucers, a future vehicle that will replace current cars and airplanes.

​

SOLUTIONS FOR BETTER TRAFFIC EARTH.

- FLIGHT:
With a soft magnetic wheel steering system, it creates the effect of multi-directional motions, creating motion navigation. Flying saucer is not limited in range and operating environment, from the underwater environment to the atmosphere as well as in outer space, so the flying saucer is equipped with an oxygen compression system for human use. use. 
The control system is mostly used in automatic mode, from keeping a safe distance between the flying boats to the parking brake system, which is programmed and processed by computer, only in rare cases used. manual steering. they operate based on navigation satellites and 3D maps.

​

- Spherical spaceship: When flying out into space, there is no longer any air resistance to meet the needs of a large-volume cabin, people often use a spherical ship with a structure of pans arranged in four directions. in the spherical shell to increase the propulsion of the spacecraft as well as easily change the flight direction even in the opposite direction of motion.

​

SPEED TRAIN: When the need for super-fast speed, used to make space probes or explore remote areas in space, people often use a train shaped like a bell with a main engine with a diameter of maximum rear and small magnetic pans around the shell provide maximum propulsion for maximum acceleration of the spacecraft.

ALL OF THE ABOVE TYPES OF VEHICLES USE THE GROWTH OF THE FIELDS FROM ACCELERATION. SO WHEN PROGRAMMING PEOPLE HAVE TO KNOW THE FLIGHT SPACE PARAMETER IN advance to calculate the reverse slamming force of the airship's flight acceleration.

​

- The second experiment invites you to do the same: the equipment consists of a flashlight, a plastic tube with a diameter of the mouth of the flashlight 20 cm long, a converging lens equal to the diameter of the plastic tube, a length of 2.0 mm copper wire 2 m long, 3 pcs 1.5 volt batteries.
Operation: wrap copper wire around the plastic tube, then attach the two ends of the wire with 3 batteries attached in series so that the projection direction of the lamp is the positive pole and the other end is the negative pole, attach the converging lens to the negative pole of the lamp. tube, turn on the flashlight to shine a stream of light through the wire. The point of convergence of the stream of light we shine on an ordinary drop of water, observe what happens. We see the drop of water colloidal like a transparent mucus.
Comments on the experiment. A stream of high-energy light has changed the chemistry of water molecules. This proves a physical theory that humans can create or alter a substance molecule or a chemical element. .
Think about the second experiment. that man imitates nature to create the subjective world of man, the primordial beginnings of man-making.

Although biological humans are not equal to robotics in terms of strength, calculation speed, instant but humane sensing of humanity.
When talking about energy machines as written in the previous section, it seems really absurd at first, we know that when a kilogram of matter decays, they release a huge amount of energy, so when combined, it also requires a lot of energy. respectively, when our electrical energy is very small, we choose the solution of transforming the element with the source of water, but when creating matter from a long distance we really need the mechanical fusion energy. , so how to meet that requirement, as described in the previous section, we have to decompose matter into raw materials to create particle energy and then use an energy-rated reinforcement system for the following beams. which aggregates the beams at the point of interference. One problem is that when the products formed are compounds, not just pure products,particles with different velocities carry a different energy but in the same stream of particles with different velocities there will be collisions between the front and back particles, to solve this problem we use the solution is to produce a number of beams that increase by atomic number according to the periodic table of elements so that the sum of the interfering beams represents the exact element or compound to be formed.

​

It's all in a perfectly precise process. The energy machine needs to have a hardware corresponding to the software, they are derived from the initialization of the computer program, the parameters of atomic mass, number of electron layers, number of electrons in a layer have been digitized specifically. In the basic software creation part of the computer, we can freely create new elements, molecules or compounds according to chemical formulas or equations, according to biological principles....like computer software. named RAFE has met that requirement, creating graphics and identifying product ingredients. Products created can be built with computer tools such as DNA identification, body cell mapping, building products to be created, there are also SIM-made products that are digitally copied specimens. chemical structure, product materials, original renewable energy machines, products,products from inorganic to organic products such as meat, fish, fruit...

​

***** future technology forecasts of our world *****

***** SHAPE THE FUTURE LIFE OF THE WORLD. HUMANS IN stead of living in houses will then live in a flying saucer full of functional rooms such as a bedroom, a living room... PICTURES OF THE COMPASSION FOR EVERYONE TO ENTERTAINMENT Cities WILL BECOME HISTORY Museums. DIGITAL TECHNOLOGY IS THE KEY TOOL IN EVERY EACH OF SOCIAL LIFE.

​

*****SUMMARY:

The contents are presented to clarify the following: the universe starts from the yin root infinity to the future infinity. From microparticles create electrons, nuclei, electrons and nuclei create atoms, atoms link together to create matter, matter creates blocks of matter, blocks of matter create galaxies, galaxies make up the universe, cosmic populations make up the big universe.
Humans imitate nature using computers and energy machine technology to create chemical elements combine chemical elements into compounds, according to the DNA map to create cells, cells based on nature the body cells that make up the complete human being.

​

***** Future digital technology is a collection of natural numbers, now they are no longer the electronic values ​​of atoms but the photon values ​​of the color range, not only of 7 rainbow colors that each color band has billions of different colors, so 10 photon values ​​are very small compared to billions of colors. Microprocessors now belong to optical ((diamond)) microprocessors, they separate colors or integrate colors with the speed of light and can handle billions of calculations in the millionth of a second. Optical direct path accelerates faster than ordinary light. storage devices are no longer metal memory sticks but photosynthetic compounds as we know the space between atoms is very large, they can store large volumes of elements in a unit mass.
Thus, future digital technology can meet the extremely large number of calculations used in energy machines.

 

***** that's all in the project of the future world.

​

Author: Hoang Dinh Vinh

ROYAL DIFFERENCE JANUARY 24, 2018

 

I am looking for a partner company to build a prototype of the world's first flying saucer for international copyright registration and progress to mass production. Looking forward to cooperating with you.

​

- Currently, we are deploying an unmanned flying saucer with a small size for space exploration, when flying into space, the internal combustion engines do not have enough oxygen to supply the engines. We develop a small capacity permanent generator engine suitable for spacecraft with a turbine blade system made of symmetric and polar permanent magnets to generate torque for the motor to rotate rotor of the generator engine. Thus, it is possible to create an unmanned flying saucer with a permanent engine without fuel, for space research and reconnaissance.

​

- The second stage of the flying saucer we upgraded the engine to a nuclear jet. Using the same electrical energy and principles as the jet of the magnetic field, the nuclear launchers converge at a point in front of the main thruster of the engine to create acceleration, but different from the magnetic force, the nuclear launcher is safe, using a source of energy. The magnetron beam is activated through a tightly wound coil at a cross-sectional point, creating an additive magnetic force at that cross-sectional point with so many coils that will accelerate the beam to break the helium atom. (The hot gas of the pulverizer can be used for ease of storage and provides materials and greater atomic efficiency.) The broken particle composition is once again accelerated through the coil with duplicated coils. like that, creating a kind of proton microparticle and electron microparticle ... orientation. Provide safe propulsion for the second generation of flying saucers.Note; The winding conductor is a wire rod with a trapezoidal cross section, so when winding the coils to create conical coils, the currents in the conductors also comply with Bernoulli's law as a liquid or a gas. thus creating a magnetic field thrust in the direction of the thrust motor.

- In the application based on the second phase of spacecraft flying saucer engine is lifting and moving objects easily. It is a spacecraft that projects a beam of heavy particles that generate enough density to lift an object off the ground to overcome the object's gravity. This can cause objects or human bodies to fly high. How to move that object? that is, the particle beam must follow concentric circles, the outer circles have a greater density than the inner ones, while the object tends to shift towards the center of that particular area. In this case, it takes a lot of energy, so it should only be used in special cases.

​

Possible projects for energy machines:
- As we all know, when digitizing images or videos, they are integrated along the horizontal and vertical lines at the image point, reproduced and displayed on the screen. 2D image when using multiple layers of 2D images to create 3D cubes, in current 3D printing technology.
- In the safe release of nuclear energy to create the desired energy source.
- Chemical element transformation based on water as a raw material is the most feasible method because they are less energy intensive.

* The method of using spheres with interference textures of energetic particle beams to determine the shape of objects as well as their material composition on a built product prototype or a copy of a specific product determined. so the product can be produced immediately.

* In addition to the method on the energy machine, it also uses long beams of particles to create distances to create products.
here use beams that are synchronously following an energetic resonance over the sum of the points of interference.
The product of the energy machine can be an inorganic substance, it can also be an organic substance or a certain specific organism.

​

- The power source of the flying saucer also adopts the second generation of the flying saucer engine with an X-ray lamp with a cathode of crushed metal that is accelerated through a reinforced tube to decompose the crushed metal. Just 100 g of X-ray shrapnel will decay 10 kg of the battery pack because the energy flow is accelerated by 100 times. and to generate voltage for battery X, we use activated carbon tank installed in series with the negative pole of the power source to create a rotation effect for the current, the coal tank is replaced when they absorb the saturated power.       

Just 1 g of metal when decaying will produce about 1 megawatts of electricity because one Mol = 6.022.10 to 23 atomic number units and an Ampere is equal to

 6.24150948 · 10 to the power of 18 electrons, so the electrical energy generated is very large.

​

For example, a flying saucer with an engine of one megawatts per second that will consume about 1 g of crushed fuel will produce an acceleration of about 10 km/s with such acceleration it will circle the earth 40,075.0 km. for a period of 89.44 seconds equals 1.5 minutes.

- Flying to the moon with a distance of 384,400 km takes only 5 minutes

- Flying to the sun with a distance of  1 49,600,000 km takes only 90 minutes

- It takes only 8.333 hours to reach the speed of light

- In a period of 24 hours the spacecraft will reach the speed of 2.8 times the speed of light and fly a distance of 37 billion km. In the space of one year, the spacecraft will fly a distance of: 5 million billion km is equal to 525.6 light years with a galaxy thickness of 2000 light years, the position of the solar system in the galaxy is at a distance. enough to fly the spacecraft out of the galaxy and consume only 31 tons of fuel.

The example above shows the great fuel economy and benefits of creating an accelerated spacecraft.

​

* Theoretically based on the principle of accelerating matter particles to reach and exceed the speed of light many times, leading to a dream of creating a spacecraft large enough to go to the bottom of the galaxy and perform the task. captures energetic matter to orient and accelerate their convergence to the desired location, the fact that the energy flows at the bottom of the galaxy are the centrifugal force decay of objects they move down that side of the galaxy at the speed of light we just make those flows of energy for human purposes.

with a stream of matter particles moving at the speed of light of an energy machine with a cross section of 10 ooo square meters when converged, in a period of 1 second will be 3000 cubic kilometers of matter with this example in about one year time would create a planet with a volume of 94.608000000 cubic kilometers and in about 10 years could create a new independent solar system in the universe.

​

* A basic thing is that in the universe they exist a kind of micro-matter particles, they are small, but they play an important role in the formation of matter and objects in the universe. They act as a transfer of gravity, we think of successive particles as a two-headed string of beads that are two vectors of the gravitational pull of two objects, but the particles themselves have an intrinsic gravitational pull. together so they are like a chain of force. The distance between particles in a stream is so small that the energy transfer of the beads is instantaneous. Because of this feature, people can build interstellar or intergalactic communication networks instantly.

​

* The universe is a space environment containing objects and populations of objects, in that space environment includes matter microparticles, those microparticles are gravitationally linked with each other by connecting rods. . The medium of particles and associated rods changes the shape of the texture depending on the free motion of the objects. Free motion by initial inertia and gravitational interactions with objects in the sphere of influence through the microparticle medium of space. Thus the universe is a unified population of two-dimensional interactions between objects and space, so they are relatively harmonious and stable, just like the big universe also includes universes in it harmoniously.

​

* For aerospace, the method of traveling by flying saucer spacecraft has the disadvantage that when accelerating to the required speed, but when reaching the destination, it must cancel the inertia, which requires an equivalent energy when accelerating. waste energy and travel time, for that reason the central spacecraft solved the above problem by the method of non-inertial motion spherical ships with inscribed cube structure Featuring a six-sided triple-complex engine, the spacecraft's front engine generates a high-energy electric decay beam that creates an absolute vacuum. Behind the spacecraft is an interferential energy-integrated converging engine. Thus creating a pressure difference between the front and rear of the spacecraft in a space worm tube, and furthermore they create a moving wave of varying amplitude in the motion tube that propels the spacecraft at will. Thus, the spacecraft of this type moves by external force, that is, the environment that helps the spacecraft to move has completely solved the problem of inertia. These spacecraft can operate mostly in the far reaches of the universe.  

​